The floor have damp problems and there were blocks that have become loose. We have removed all loose blocks, cleaned the base, removed all loose screading, applied DPM and a new screed base. All blocks have been cleaned and refitted. The entire floor has been sanded and 3 coats of seal have been applied.
Customer had large stains on the floor. By sanding the wood all stains have been removed and 3 fresh coats of seal have been applied.
On this Cherry Parquet Floor restoration project the floor has been sanded down to a fine grit and 3 coats of seal have been applied.
On this Finger Parquet Floor restoration project the floor has been repaired, sanded down and 3 coats of seal have been applied leaving the floor looking like new.
On this floor restoration project the floor was sanded to a very fine grit to make it smooth and 4 coats of high traffic lacquer were applied.
The Project manager contacted us regarding this parquet floor installation project at University of Hull. Because the floor was previously flooded, we had to remove existing blocks and leave the subfloor to dry for a period of time. Once dried screed was put down. After the screed we laid a new solid oak parquet floor. When the floor was fully laid, we have sanded and oiled with red brown oil to match other parquet floors in the building. To finish the floor and give it strength we have applied 4 coats of high traffic lacquer. As always to fit in with the customers requirement this project was done during holiday time to reduce disruption.
Project manager contacted us regarding this cherry parquet floor restoration project in Wakefield. We have been to do a survey and we have acknowledged that the floor was a solid cherry, basket wave pattern parquet floor. From discussions with project manager it became apparent this floor was never restored. The floor was in bad condition with a lot of scratches on.
This maple dance floor restoration project, The Black Horse Pub in Skipton has been a bit different from the other projects. Customer wanted the floor stained in a mahogany colour, with maple wood being a hard wood is hard to achieve a even colour when apply the stain so we had to find best solution to achieve this.
Customer contacted us regarding his solid oak sand seal floor project in Pontefract. Because the customer removed one of the internal walls the floor was left with a gap that he covered with plywood. For this repair we removed the plywood and cleaned and flattened the gap. To cover the gap we made a new bespoke piece of oak that we put in place to match the existing floor, this was fixed in place with wood glue.
Customer contacted us in regard to his oak strip floor restoration project in Wheldrake York. He wanted to know what options he was to bring the floor to former glory.
When we have been to do the survey, we have noticed the floor was full of deep scratches. We have recommended a full re-sand to remove scratches. Also, we have suggested to use a high traffic lacquer to protect the floor as much as possible. The customer agreed with our recommendation, so the work has gone ahead.
