Pine Boards Restoration South Parade York
On this project we sanded the floor up to a very fine grit. We applied dark stain and 3 coats of seal.
On this project we sanded the floor up to a very fine grit. We applied dark stain and 3 coats of seal.
Solid oak boards in the entrance were in very bad condition. The floor required full re-sand up to fine grit. After sanding 4 coats of Junckers HP commercial have been applied.
On this job we have replaced all the boards in the living room after the old ones were affected by wood worm. The floor was replaced with reclaimed board trying to match with the existing floor in the dining room. After installation the floor was fully re-sanded, stained with walnut colour and then 3 coats of lacquer.
Strip oak previously in very bad condition. We have sanded floor to fine grit and 3 coats of matt seal have been applied.
Floor sanded floor to fine grit and 3 coats of seal have been applied.
Floor sanded floor to fine grit and 3 coats of seal have been applied.
Customer contacted us to see if we can help with his hallway and living room renovation. Customer loved the look of parquet floor and he has decided he will have the same.
The parquet installation went according to plan. The parquet blocks were installed in a herringbone pattern on a plywood subfloor that we also supplied. The blocks were fixed in place using adhesive. Once installed the floor was sanded to fine grit, this has given the floor a smooth and even surface, and 3 coats of seal have been applied.
Solid oak parquet floor originally painted we had to sanded it to a fine grit and we applied 3 coats of seal.
Pine floor restoration done in North Cave. We have sanded the floor to a fine grit and we applied 3 coats of seal.
We have sanded the floor and then we have applied Osmo oil to protect it for a long lasting finish