Solid teak parquet done in Wakefield. A bit of concrete area on the hall entrance has been removed, new parquet has been installed to fill the gap. Also, around fireplace there have been a few repairs to be done after the customer changed the hearth. Once all repairs were completed entire area has been sanded down and black Osmo oil has been applied. The floor was finishes with 1 coat of clear oil.
Engineered oak strip sanded, previously very worn. We have completed the floor for our customer with 2 coates of Osmo Oil.
Pine boards floor restored for our customer by sanding it down and complated with 3 coates of clear Junckers Strong lacquer.
Reclaimed Oak restoration project done when for our customer. Customer contacted us after he had a go at restoring the floor himself to save money but the floor was left very patchy. On this project we had to do a full resand and we have completed the floor with 3 coates of clear Junckers Strong lacquer
Solid walnut parquet restoration done for our customer in Spofforth. The floor was sanded and completed with 3 coates of clear Junckers Strong lacquer.
Solid beech parquet floor, sanded gap filled and completed with 3 coates of clear lacquer
Solid pine boars restoration done in Walkington. Entire floor was sanded down, light walnut stain was applied and the floor was finished with 3 coates of clear high traffic lacquer.
Solid mahogany parquet restored. Entire floor was sanded, we have used gap fillind to fill gaps caused by the curring of the material. Once sanded the floor was finished 3 coates of clear high traffic lacquer.
Engineered oak strip restored in South Cave. The floor was fully sanded and completed with 3 coates of high traffic clear lacquer.
Solid oak strip floor restoration. Floor was sanded, walnut stain was applied. Once dry floor was completed with 3 coates of clear matt lacquer.
