The floor have damp problems and there were blocks that have become loose. We have removed all loose blocks, cleaned the base, removed all loose screading, applied DPM and a new screed base. All blocks have been cleaned and refitted. The entire floor has been sanded and 3 coats of seal have been applied.
Engineered oak floor pre-finished with lime wash. We have installed the floor on silent mat to reduce noise due to customer living in a apartment.
Solid teak parquet done in Wakefield. A bit of concrete area on the hall entrance has been removed, new parquet has been installed to fill the gap. Also, around fireplace there have been a few repairs to be done after the customer changed the hearth. Once all repairs were completed entire area has been sanded down and black Osmo oil has been applied. The floor was finishes with 1 coat of clear oil.
Engineered oak strip sanded, previously very worn. We have completed the floor for our customer with 2 coates of Osmo Oil.
Pine boards floor restored for our customer by sanding it down and complated with 3 coates of clear Junckers Strong lacquer.
Reclaimed Oak restoration project done when for our customer. Customer contacted us after he had a go at restoring the floor himself to save money but the floor was left very patchy. On this project we had to do a full resand and we have completed the floor with 3 coates of clear Junckers Strong lacquer
