Engineered oak strip – Harrogate
Engineered oak strip, sanded and completed with 3 coates of junckers clear lacquer in Harrogate
Engineered oak strip, sanded and completed with 3 coates of junckers clear lacquer in Harrogate
Pine boards floor previously very worn, sanded down,stained with walnut stain and completed with 3 coates of Junckers HP
Unfinished Solid oak strip supplied and layed with hidden nails, sanded and completed with 3 coates of lacquer, also subfloor has been prepared with 9mm plywood
The Pine floor has been sanded down and 3 coats of seal have been applied.
The Pine floor has been sanded down and 3 coats of seal have been applied.
We have sanded the floor to a very fine grit and we applied 3 coats of seal.
The Engineered oak floor was in need of a restoration.The floor had to be sanded down white oil has been aplied for the white wash effect 2 coats of seal after the oil.
On this project we sanded the floor up to a very fine grit. We applied dark stain and 3 coats of seal.
On this job we have replaced all the boards in the living room after the old ones were affected by wood worm. The floor was replaced with reclaimed board trying to match with the existing floor in the dining room. After installation the floor was fully re-sanded, stained with walnut colour and then 3 coats of lacquer.
Floor sanded floor to fine grit and 3 coats of seal have been applied.