Lime Wash Floor Installation Leeds
Engineered oak floor pre-finished with lime wash. We have installed the floor on silent mat to reduce noise due to customer living in a apartment.
Unfinished Solid Oak Strip Horsforth Leeds
Unfinished solid oak strip supplied and fitted. The floor was laid on a plywood subfloor with hidden nails. Once fitted the entire floor was sanded and was finished with 2 coates of Osmo oil
Reclaimed Pine Boards Installation York
Straight edge reclaimed pine boards, layed on top of existing floor boards with a 4 mm plywood subfloor to stop draft coming thru. The floor was completed with 2 coates of clear Osmo oil.
Oak Strip Installation – Bracewell, Skipton
Oak strip supplied and fitted with hidden nails on a 18mm plywood base. The new floor had to match existing oak strip floors in the house. Once installed entide downstairs was sanded and completed with 3 coates of Junckers Strong.
Oak Engineered Strip in Harrogate
Pre finished Oak Engineered Strip supplied and installed in Harrogate. A recess was created for the carpet to fit in.
Oak strip installed in Escrick
Solid Oak strip installed in one of the customers rooms. Once installed the entire downstairs was sanded and 3 coates of lacquer were applied.
Oak Strip Restoration Hemingbrough
Lifting up damaged area of parquet by a toilet ball where there was a leak in cloak room, leave base to dry, supply and fit matching parquet, sanding and finish entire area with 3 coates of lacquer Hemingbrough york
Reclaimed pine boards – Harrogate
Reclaimed pine boards, supplied, laid and sanded. Completed with 2 coats of clear Osmo Hard wax in Harrogate
Solid oak strip installation Beverley
Unfinished Solid oak strip supplied and layed with hidden nails, sanded and completed with 3 coates of lacquer, also subfloor has been prepared with 9mm plywood
Pontefract Reclaimed Pine Floor
On this job we have replaced all the boards in the living room after the old ones were affected by wood worm. The floor was replaced with reclaimed board trying to match with the existing floor in the dining room. After installation the floor was fully re-sanded, stained with walnut colour and then 3 coats of lacquer.